GENERATOR SUPERSTORE The largest selection of generator, water pump, pressure washer, chainsaw, and lawn mower products at the lowest prices anywhere. Powered by Honda, Mitsubishi, Yamaha, Onan, Kawasaki, Robin, Coleman, Porter Cable, Multiquip, Detroit Diesel, Yanmar, Generac, Snapper, Husqvarna, Jonsered, Karcher and more!
Powered by Honda Generators | Yamaha generators | Kawasaki generators Porter Cable generators | PowerStation generators | On-Line Catalog
Generators | Air Compressors | Pressure Washers
ENGINE DRILLS - CLICK HERE
PORTER CABLE DRILL MODELS NOT AVAILABLE
Model - 2620: 3/8" Drill 4.5 Amps, AC only 0-1,200 RPM Variable speed, reversing Capacities: 3/4" wood, 3/8" steel Heavy-duty 2-stage gearing 100% ball & needle bearings Cast aluminum machined gear housing & bearing plate Dust sealed switch Standard Equipment: Chuck Key #826226 and operating manual Shipping Weight: 5 lbs
Model # Power Motor Amps Motor Watts Chuck Size Gear Reduction Speed (RPM) Drilling Capacity (Wood) Drilling Capacity (Steel) Length (Inches) Net Weight (Lbs) Shipping Weight (Lbs) 2620 120 VAC, 50-60 HZ 4.5 540 3/8 2-Stage 0-1,200 10-1/4" 3/4" - 3-3/4 5
Model - 6614: 1/2" Drill 5.5 Amps, AC only 0-750 RPM Variable speed, reversing Capacities: 1-3/4" wood, 1/2" steel Extra-heavy-duty 3-stage gearing 100% ball & needle bearings Cast aluminum machined gear housing & bearing plate Dust sealed switch Standard Equipment: Chuck Key #810543 and operating manual Shipping Weight: 6 lbs.
Model # Power Motor Amps Motor Watts Chuck Size Gear Reduction Speed (RPM) Drilling Capacity (Wood) Drilling Capacity (Steel) Length (Inches) Net Weight (Lbs) Shipping Weight (Lbs) 6614 120 VAC, 50-60 HZ 5.5 660 1/2 3-Stage 0-750 1-3/4" 1/2" 11-1/2 4-3/4 6
Model - 2621: 3/8" Drill 4.5 Amps, AC only 0-1,200 RPM Variable speed, reversing Heavy-Duty Jacobs Hand-Tite keyless chuck with high-grip jaws Capacities: 3/4" wood, 3/8" steel Heavy-duty 2-stage gearing 100% ball & needle bearings Cast aluminum machined gear housing & bearing plate Dust sealed switch Includes operating manual Shipping Weight: 5 lbs.
Model # Power Motor Amps Motor Watts Chuck Size Gear Reduction Speed (RPM) Drilling Capacity (Wood) Drilling Capacity (Steel) Length (Inches) Net Weight (Lbs) Shipping Weight (Lbs) 2621 120 VAC, 50-60 HZ 4.5 540 3/8 2-Stage 0-1,200 10-1/4" 3/4" - 3-3/4 5
Model - 6615: 1/2" Drill 5.5 Amps, AC only 0-750 RPM Variable speed, reversing Heavy-Duty Jacobs Hand-Tite keyless chuck with high-grip jaws Capacities: 1-3/4" wood, 1/2" steel Extra-heavy-duty 3-stage gearing 100% ball & needle bearings Cast aluminum machined gear housing & bearing plate Dust sealed switch Includes operating manual Shipping Weight: 6 lbs.
Model # Power Motor Amps Motor Watts Chuck Size Gear Reduction Speed (RPM) Drilling Capacity (Wood) Drilling Capacity (Steel) Length (Inches) Net Weight (Lbs) Shipping Weight (Lbs) 6615 120 VAC, 50-60 HZ 5.5 660 1/2 3-Stage 0-750 1-3/4" 1/2" 11-1/2 4-3/4 6
Model - 97751: 1/2" Two-Speed-Range Hammer Drill Kit 6 Amps, AC only Variable speed reversing Low Speed 0-1,000 RPM High Speed 0-2,500 RPM 0-20,000 BPM (Low Speed Range) 0-50,000 (High Speed Range) Capacities: Low … 3/4" masonry, 1/2" steel, 1" wood High … 3/8" masonry, 5/16" steel, 3/4" wood 100% ball and roller bearings Dust sealed switch 360 degree side handle w/ locking depth stop Die-cast & precision machined metal gear housing Machined steel chuck Knob selects hammer-drilling or drilling mode Standard Equipment: Chuck Key #875134, Side Handle #698650, Depth Rod #698992, and operating manual Shipping Weight: 7 lbs.
Model # Power Motor Amps Motor Watts No load Speed (RPM) BPM Chuck Capacity Drilling Capacity (Steel) Drilling Capacity (Concrete) Drilling Capacity (Wood) Length (Inches) Carrying Case Net Weight (Lbs) Shipping Weight (Lbs) 97751 120 VAC, 50-60 HZ 6.0 720 0-1,000 Low 0-20,000 Low 1/2" 1/2" Low 3/4" Low 1" Low 13-3/8 No 6 7
Model - 7564: 1/2" Spade Handle Drill 8 Amps, AC only 500 RPM Reversing Capacities: 1-3/4" wood, 1/2"steel Extra-heavy-duty 3-stage gearing 100% ball & needle bearings Cast aluminum machined gear housing & bearing plate Dust sealed switch Standard Equipment: Chuck Key # 875134, Removable Breast Plate # 811352, Detachable Pipe Handle #846874, and operating manual Shipping Weight: 11 lbs.
Model # Power Motor Amps Motor Watts Chuck Size Gear Reduction Speed (RPM) RT Angle Length Drilling Capacity (Wood) Drilling Capacity (Steel) Length (Inches) Net Weight (Lbs) Shipping Weight (Lbs) 7564 120 VAC, 25-60 HZ 8 920 - 3-Stage 500 - 1-3/4" 1/2" 15-1/2 8 11
Model - 9878CS: 14.4 volt Drill/Driver Circular Saw Combo Kit 14.4 volt, 2 Amp/hour batteries for more power & longer run time Interchangeable battery system power drill, hammer-drill, circular saw, and more. 6" SawBoss Circular Saw 3,000 RPM, premium 6" thin-kerf 18-tooth carbide-tipped Riptide blade, makes up to 80 cross cuts on 2X4" material on a single charge, cuts 2x lumber in one pass, even at 45" bevel. 1/2"Keyless-Chuck Drill 360 in./lbs of maximum torque, 20-position clutch, (0-475 & 0-1,450 RPM) Standard Equipment: Drill, circular saw, two high-capacity battery packs, advanced diagnostic charger, carrying case, and operating manual Shipping Weight: 20 lbs.
Model - 9884CS: 19.2 Volt Cordless Drill/Driver/Circular Saw Combo Kit 19.2 volt, 2 Amp/hour batteries for more power & longer run time Interchangeable network battery system powers drill, hammer-drill, circular saw, and more Includes drill, circular saw, two high capacity battery packs, advanced diagnostic charger, carrying case, and operating manual 1/2" Keyless Chuck Drill -- 390 in/lbs of maximum torque, 20-position clutch, (0-500 & 0-1,500 rpm) 6" SawBoss Circular Saw -- 2,600 RPM, premium 6" thin-kerf 18-tooth carbide-tipped Riptide blade, makes up to 100 cross cuts on 2x4" material on a single charge, cuts 2x lumber in one pass, even at 45 degree bevel Shipping Weight: 20 lbs.
Model - 9884:19.2 Volt Cordless Drill/Driver Kit 19.2 volt, 2 Amp/hour batteries for more power & longer run time Interchangeable network battery system powers drill, hammer-drill, circular saw, and more 1/2" keyless chuck with 390 in./lbs. maximum torque 20 position clutch including solid lock-up 2-speed gear box (0-500 & 0-1,500 RPM) (0-19,500 BPM) Includes two high-capacity battery packs, advanced diagnostic charger, carrying case, double-ended bit tip, and operating manual Shipping Weight: 16 lbs.
Model # Power Amp/Hr Rating Motor Output Watts Torque Output (In./Lbs.) Chuck Size (Inches) Speed (RPM) Length (Inches) Net Weight (Lbs.) Shipping Weight (Lbs.) 9884 19.2 V 2 382 390 1/2 0-500 0-1,500 10 5-1/2 16
Model - 9887: 19.2 Volt Cordless Hammer Drill Kit 19.2 volt, 2 Amp/hour batteries for more power & longer run time Interchangeable network battery system powers drill, hammer-drill, circular saw, and more 1/2" keyless chuck with 390 in./lbs. maximum torque 20 position clutch including solid lock-up 2-speed gear box (0-500 & 0-1,500 RPM) (0-19,500 BPM) Includes two high-capacity battery packs, advanced diagnostic charger, carrying case, double-ended bit tip, and operating manual Shipping Weight: 16 lbs.
Model # Power Amp/Hr Rating Motor Output Watts Torque Output (In./Lbs.) Chuck Size (Inches) Speed (RPM) Length (Inches) Net Weight (Lbs.) Shipping Weight (Lbs.) 9887 19.2 V 2 382 390 1/2 0-500 0-1,500 10 5-1/2 16
Model - 9876: 14.4 Volt 3/8" Cordless Drill Driver Kit 14.4 volt, 2 Amp/hour batteries for more power & longer run time 1/2" keyless chuck with 360 in./lbs. maximum torque 20 position clutch including solid lock-up 2-speed gear box (0-475 & 0-1,450 rpm) (0-18,850 bpm) Includes two high-capacity battery packs, advanced diagnostic charger, carrying case, double ended bit tip, and operating manual Shipping Weight: 15 lbs.
Model # Power Amp/Hr Rating Motor Output Watts Torque Output (In./Lbs.) Chuck Size (Inches) Speed (RPM) Length (Inches) Net Weight (Lbs.) Shipping Weight (Lbs.) 9877 14.4 V 2 331 360 1/2 0-475 & 0-1,450 10 5-1/4 15
Model - 9878: 14.4 Volt 1/2" Cordless Drill/Driver Kit 14.4 volt, 2 Amp/hour batteries for more power & longer run time 1/2" keyless chuck with 360 in./lbs. maximum torque 20 position clutch including solid lock-up 2-speed gear box (0-475 & 0-1,450 rpm) (0-18,850 bpm) Includes two high-capacity battery packs, advanced diagnostic charger, carrying case, double ended bit tip, and operating manual Shipping Weight: 15 lbs.
Model # Power Amp/Hr Rating Motor Output Watts Torque Output (In./Lbs.) Chuck Size (Inches) Speed (RPM) Length (Inches) Net Weight (Lbs.) Shipping Weight (Lbs.) 9878 14.4 V 2 331 360 1/2 0-475 & 0-1,450 10 5-1/4 15
Model - 9866: 12 Volt Cordless Drill/Driver Kit 12 volt, 2 Amp/hour batteries for more power & longer run time 3/8" keyless chuck with 330 in./lbs. maximum torque 20 position clutch including solid lock-up 2-speed gear box (0-400 & 0-1,200 rpm) (0-18,850 bpm) Includes two high-capacity battery packs, advanced diagnostic charger, carrying case, double ended bit tip, and operating manual Shipping Weight: 14 lbs.
Model # Power Amp/Hr Rating Motor Output Watts Torque Output (In./Lbs.) Chuck Size (Inches) Speed (RPM) Length (Inches) Net Weight (Lbs.) Shipping Weight (Lbs.) 9866 12 V 2 250 330 3/8 0-400 & 0-1,200 10 5 14
MSRP: $297.90
Your Price: $161.00
Model - 9866F: 12 Volt Cordless Drill/Driver Kit w/ Flashlight 12 volt, 2 Amp/hour batteries for more power & longer run time 3/8" keyless chuck with 330 in./lbs. maximum torque 20 position clutch including solid lock-up 2-speed gear box (0-400 & 0-1,200 rpm) (0-18,850 bpm) Flashlight with high intensity Xenon bulb Includes two high-capacity battery packs, flashlight, advanced diagnostic charger, carrying case, double ended bit tip, and operating manual Shipping Weight: 14 lbs.
Model # Power Amp/Hr Rating Motor Output Watts Torque Output (In./Lbs.) Chuck Size (Inches) Speed (RPM) Length (Inches) Net Weight (Lbs.) Shipping Weight (Lbs.) 9866F 12 V 2 250 330 3/8 0-400 & 0-1,200 10 5 14
MSRP: $384.00
Your Price: $188.00
Model - 9877: 14.4 Volt Cordless Hammer Drill Kit 14.4 volt, 2 Amp/hour batteries for more power & longer run time 1/2" keyless chuck with 360 in./lbs. maximum torque 20 position clutch including solid lock-up 2-speed gear box (0-475 & 0-1,450 rpm) (0-18,850 bpm) Includes two high-capacity battery packs, advanced diagnostic charger, carrying case, double ended bit tip, and operating manual Shipping Weight: 15 lbs.
Model # Power Amp/Hr Rating Motor Output Watts Torque Output (In./Lbs.) Chuck Size (Inches) Speed (RPM) Length (Inches) Net Weight (Lbs.) Shipping Weight (Lbs.) 9877 14.4 V 2 331 360 1/2 0-475 & 0-1,450 10 5-1/4 15
Home |Products |Order |Company Info |Contact
Porter Cable Tool Porter Cable saw 3M Product 
